Internal Shut Off Valve Access - Travis Industries Xtreme 6020 Installation Manual

18

Internal Shut Off Valve Access

The internal shutoff valve may be accessed without removing the burner. See the instructions below.
NOTE: The shut off valve must be closed while pressure testing the gas line leading to the fireplace.
Turn off gas to the fireplace prior to accessing internal components to prevent accidental ignition. Shut
off electricity to the fireplace to prevent protect internal circuits.
Remove the left side access panel (see page 17)
The shutoff valve is located near the gas inlet. Reach in and turn the gas control valve or use a tool to
carefully reposition the valve knob.
© Travis Industries
Installation
(for qualified installers only)
4140717 100-01351