Framing For Exhaust Box - Travis Industries Xtreme 6020 Installation Manual

34

Framing For Exhaust Box


The exhaust box must be mounted into framing capable of supporting the weight of the exhaust
box and any vent.

Box must be properly weatherized to prevent rain or snow from entering.

Framing dimensions for the box are listed below.

Box may be mounted in a vertical or horizontal position. If mounted in a horizontal position, the
box must be mounted with the cooling holes on top (to allow for proper airflow).
Cooling Holes
© Travis Industries
Installation
Horizontal Termination
20-1/2"
521mm
17-1/4"
438mm
(for qualified installers only)
Vertical Termination
17-1/4"
438mm
4140717
20-1/2"
521mm
100-01351