Accessing Internal Components - Travis Industries Xtreme 6020 Installation Manual

Accessing Internal Components

Turn off gas to the fireplace prior to accessing internal components to prevent accidental ignition. Shut
off electricity to the fireplace to prevent protect internal circuits.
Three access panels are provided along the front of the fireplace to allow access to the internal
components of the fireplace. Follow the directions below to remove the access panel(s). The left panel
is shown in the pictures below. The same process is used for the center and right side panel.
Remove the glass frame. Remove the front firebox tray (it is painted, enamel, or stainless steel). Take
care to prevent scratching any surfaces.
Remove the screws holding the left access panel in place.
Remove the access panel and place it aside (take care to prevent damage the wiring leading to the snap disc).
© Travis Industries
Installation
(for qualified installers only)
4140717
17
100-01351