Recommended Installation Procedure - Travis Industries Xtreme 6020 Installation Manual

8

Recommended Installation Procedure


Frame the opening for the fireplace. Make sure to allow for vent and inlet duct installation.

Place the fireplace in position and secure to floor.

Install the exhaust vent, air inlet, gas line, electrical line, and battery box (power heat ducts if
applicable).

Test operation of the fireplace before attaching fiber-board or drywall. This allows the installer to
verify all connections and diagnose issues with the fireplace exterior accessible.

Install included non-combustible framing above fireplace.

Attach included fiber-board to fireplace and framing. Install 2" fiber-board strip above facing
guide.

Install the drywall and/or facing.

Install the hearth (if applicable).

Install the facing (if applicable).

Install the mantel (if applicable).

Finalize the installation (see page 43).
© Travis Industries
Installation
(for qualified installers only)
4140717 100-01351