Call Park - Panasonic KX-NCP500 Feature Manual

PC Programming Manual References
4.11 [2-6-3] Numbering Plan—B/NA DND Call Feature—
4.12 [2-7-1] Class of Service—COS Settings—Executive—
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 2— Data Mode
→Option 3— Executive Override Deny
6.10 [4-2-1] Portable Station—Extension Settings—Option 3—
Feature Manual References
3.1.23 COS (Class of Service)
Operating Manual References
1.3.7 Call Monitor

3.1.8 Call Park

Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be used
as a transferring feature; this releases the user from the parked call to perform other operations. A parked call
can be retrieved by any extension user.
Conditions
•
Automatic Call Park
It is possible to select an idle parking zone automatically.
•
Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the originator
will hear a busy tone. Retrying is possible while hearing a busy tone by selecting another parking zone or
a vacant zone.
•
Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, the Call Park Recall tone will be heard
at the Transfer Recall destination assigned to the extension which parked the call. If the destination is
engaged in a call, the Hold Alarm will be heard.
•
If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
•
Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
Any flexible button can be customized as the Call Park button. It shows the current status of the preset
parking zone as follows:
Light pattern
Slow red flashing
Off
•
Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.
Any flexible button can be customized as the Call Park (Automatic Park Zone) button.
Document Version 2013-05
Call Monitor
A call is parked in the preset parking zone
There are no parked calls
Call Monitor
Executive Override Deny
Status
3.1.8 Call Park
Feature Manual 47