Ps-Co Status Display (Kx-Wt125/Kx-Wt126 Only); Ps-Directory - Panasonic KX-NCP500 Feature Manual

Feature Manual References
6.1.4 Flexible Numbering/Fixed Numbering
13.1.28 PS—CO Status Display (KX-WT125/KX-WT126 only)
Description
The status of CO lines selected through system programming can be displayed on the KX-WT125/
KX-WT126, even when the PS is idle. For information about PS settings and conditions, refer to the
documentation for the KX-WT125/KX-WT126.
Conditions
•
To use the CO Status Display feature of the KX-WT125 and KX-WT126, the following versions are required:
DHLC/DLC card: LPR software version 7.003 or later
CSIF card: LPR software version 4.006 or later
BUS-S card (KX-TDE600 only): LPR software version 3.012 or later
DECT 6.0 CSs: software version 7.000 or later
•
A maximum of 12 CO lines can be selected for this feature using system programming.
•
This feature can be disabled using system programming. However, disabling this feature will also disable
the display of single CO line numbers on the PS.
•
If a CO line other than those specified in system programming or a feature is assigned to a flexible button
of the PS, the CO line status will not be displayed for that button while the PS is idle or when receiving a
call as a member of a PS ring group.
PC Programming Manual References
3.48 [1-3] Option—
Restart)
6.17 [4-2-6] Portable Station—Single CO Appearance
13.1.29 PS—Directory
Description
A portable station (PS) user can make a call or access PBX features using information stored in the PS and
PBX.
Refer to the Operating Instructions supplied with your PS for available directories and usage.
Directory Type
PS Dialing Directory
Quick Dialing
System Speed
Dialing Directory
Document Version 2013-05
System Wireless—CO Status Display in Standby (KX-WT125/126 only) (Need System
Description
A list of names and telephone numbers. Used to
make a call to one of the stored parties.
A list of frequently dialed feature numbers as well as
names and telephone numbers. Used to quickly
access one of the stored features, or quickly make a
call to one of the stored parties.
A system-wide list of names and telephone numbers.
Used to make a call to one of the stored parties.
13.1.29 PS—Directory
Programming
Stored in the PS by the
PS user.
Stored in the PS by the
PS user.
Stored in the PBX.
Feature Manual 289