Tenant Service - Panasonic KX-NCP500 Feature Manual

17.1.3 Tenant Service

Installation Manual References
KX-NCP500/KX-NCP1000
3.10 Connection of Peripherals
KX-TDE100/KX-TDE200
3.10 Connection of Peripherals
KX-TDE600
3.12.1 Connection of Peripherals
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features—
4.20 [2-11-1] Audio Gain—Paging/MOH
→ Paging—EPG (External Pager) (for KX-NCP series)/EPG 1 (External Pager 1) (for KX-TDE series)
→ Paging—EPG 2 (External Pager 2) (KX-TDE series only)
7.2 [5-2] External Pager
PT Programming Manual References
[700] External Pager Floating Extension Number
Operating Manual References
1.3.65 TAFAS (Trunk Answer From Any Station)
17.1.3 Tenant Service
Description
Tenant service is a cost-effective method of providing PBX services to different offices or companies located
in the same building, while using only one PBX.
1.
Tenant Configuration
Tenant Members
Extensions are assigned to a tenant indirectly; they are assigned to extension user groups, and these
extension user groups are assigned to tenants. An extension can belong to only one extension user group
and an extension user group can belong to only one tenant, therefore an extension can belong to only one
tenant. (® 7.1.1 GROUP FEATURES)
Time Service
Time modes are used by many PBX features to determine how they will function during different times of
day (® 17.1.5 Time Service). The start and end times of each time mode (day/lunch/break/night) for each
day of the week are programmed in a Time Table. Each Time Table has a number which corresponds to
the tenant number of the tenant it serves. (Tenant 1 uses Time Table 1, etc.)
336 Feature Manual
TAFAS Answer
Document Version 2013-05