Call Park - Panasonic KX-TDA100 Features Manual

1.11 Holding Features

1.11.2 Call Park

Description
An extension user can place a held call into a common parking area of the PBX. This releases
the user from the parked call to perform other operations. The parked call can be retrieved by
any extension user.
Conditions
• Automatic Call Park
It is possible to select an idle parking area automatically.
• Retry
If the specified parking area is occupied or there is no vacant area for Automatic Call Park,
the originator will hear busy tone. Retrying is possible while hearing busy tone by
selecting parking area or a vacant area.
• Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, Call Park Recall will
be heard at the extension assigned as the Transfer Recall destination. If the extension is
engaged in a call, the hold alarm will be heard.
• If a parked call is not retrieved within a preprogrammed time period (Default: 30 minutes),
it is automatically disconnected.
• Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking area.
A flexible button can be customised as the Call Park button. It shows the current status
of the preset parking area as follows:
Slow red flashing
Off
• Call Park Retrieve Deny
If an extension user cannot call certain extensions on a COS basis (
in Section 1.1.2 Internal Call Features—SUMMARY), he cannot retrieve the parked call
which the extensions made.
122 Feature Guide
Light pattern
Parked in the preset parking area
No parked call
Status
Internal Call Block