Panasonic KX-NCP500 Feature Manual page 374

19.1.5 Voice Mail DTMF Integration
[Example of a) & b)]
CO Line Call
Operator
c.
Voice Mail (VM) Transfer Button
By pressing the Voice Mail (VM) Transfer button during a call, an extension user can transfer a call to
a mailbox of the VPS so that the caller can leave a message in the mailbox of the desired extension.
When the extension user presses this button and enters the desired extension number, the PBX will
transfer the call to the VM group and dial the mailbox number of the desired extension with the required
command (after the VPS answers the call). Therefore the caller can leave a message without knowing
the mailbox number.
6.5 [4-1-4] Wired Extension—Flexible Button
→
Type
→
Extension Number (for Voice Mail Transfer)
6.13 [4-2-3] Portable Station—Flexible Button
→
Type
→
Extension Number (for Voice Mail Transfer)
6.18 [4-3] DSS Console
→
Type
→
Extension Number (for Voice Mail Transfer)
[Performance of Pressing the VM Transfer Button and Entering an Extension Number]
Switching to VM command + Recording
message command (#6 + H [H = Mailbox No.])
374 Feature Manual
PBX
FWD, Intercept
Transfer
Extn. 102
Transmitted Command
In AA Service Mode
Sent "#6" + "102".
mailbox number
Switching to VM command
VPS (In AA service mode)
VM Port 1
VM (DTMF)
Group
VM Port X
In VM Service Mode
Recording message command (H [H =
Mailbox No.])
VM Port 2
VM Port 3
Document Version 2013-05