Syslog Record Management - Panasonic KX-NCP500 Feature Manual

16.1.10 Syslog Record Management

3.9.5 ESVM4 Card (KX-TDA0194)
PC Programming Manual References
2.5.4 Tool—Simplified Voice Message—Delete All Recording
2.5.5 Tool—Simplified Voice Message—Check Current Usage
3.5 [1-1] Slot—OPB3 Card Property—
3.44 [1-1] Slot—OPB3 Card Property—
4.5 [2-3] Timers & Counters—Miscellaneous
→ SVM—Recording Time
→ SVM—Dial Tone Continuous Time
4.9 [2-6-1] Numbering Plan—Main—Features—
5.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
→ Simplified Voice Message Tone Detection—Silence
→ Simplified Voice Message Tone Detection—Continuous
→ Simplified Voice Message Tone Detection—Cyclic
6.1 [4-1-1] Wired Extension—Extension Settings—Option 6—
6.9 [4-1-7] Wired Extension—Simplified Voice Message
6.10 [4-2-1] Portable Station—Extension Settings—Option 6—
6.16 [4-2-5] Portable Station—Simplified Voice Message
7.5 [5-3-3] Voice Message—SVM
Feature Manual References
4.1.4 Dial Tone
12.1.2 OGM (Outgoing Message)
20.1.1 Walking COS
21.1 Capacity of System Resources
Operating Manual References
1.3.64 SVM (Simplified Voice Message)
3.1.2 Personal Programming
16.1.10 Syslog Record Management
Description
By connecting this PBX to a Syslog server over a LAN, it is possible to output local alarm information (major
alarms/minor alarms) to a external PC.
Conditions
•
To be able to use this feature, through system programming, it is required to enable this feature, register
the IP address of the Syslog server, and to select whether major/minor are sent.
PC Programming Manual References
13.1 [11-1] Main—Syslog
330 Feature Manual
SVM Feature
SVM Feature
Simplified Voice Message Access
Display Lock / SVM Lock
SVM Lock
Document Version 2013-05