Private Network Features-Qsig-Ct (Call Transfer) - Panasonic KX-NCP500 Feature Manual

13.1.24 Private Network Features—QSIG—CT (Call Transfer)
13.1.24 Private Network Features—QSIG—CT (Call Transfer)
Description
The PBX transfers the call to a destination extension in another PBX in the QSIG network.
If the same trunk group is used for the incoming call and the transferred call, the following situation will be
possible.
[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
•
This feature can be enabled or disabled on an ISDN (QSIG) port basis.
•
Call Transfer with Announcement and Call Transfer without Announcement is possible (® 3.1.11 Call
Transfer).
PC Programming Manual References
3.33 [1-1] Slot—Port Property - PRI Port—Supplementary Service—
CNIR, CONR, CF (Rerouting), CT, CCBS, E911
3.38 [1-1] Slot—Card Property - IP Gateway (KX-TDE series only)—
3.48 [1-3] Option—
278 Feature Manual
QSIG
1
Call to 2000
2 Transferred
to 1001
Extn. 2000
QSIG
Extn. 2000
New Card Installation—ISDN Standard Mode for PRI23 Card
Extension 1000 of PBX-1 dials
1
extension number "2000", and the call
is sent to extension "2000" of PBX-2
through QSIG network.
PBX-2
The call is transferred from extension
2
2000 to extension "1001" of PBX-1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the transfer destination of
extension 2000.
PBX-2
COLP, CLIR, COLR, CNIP, CONP,
QSIG-CT
Document Version 2013-05