Panasonic KX-NCP500 Feature Manual page 345

Note
Any extension user (except extension users allowed to change the mode) can only check the current
status on the display by pressing the Time Service button.
Conditions
•
PT programming can set the Start and/or End time of the following:
–
Day-1 (Day Start time)
–
Lunch (Lunch Start time)
–
Day-2 (Lunch End time)
–
Night (Night Start time)
PC programming can also set the following three time periods for break mode per day.
–
Break-1 Start
–
Break-1 End (Day restart)
–
Break-2 Start
–
Break-2 End (Day restart)
–
Break-3 Start
–
Break-3 End (Day restart)
•
Time Service Switching Mode (Automatic/Manual) Button
A flexible button can be customized as the Time Service Switching Mode (Automatic/Manual) button.
PC Programming Manual References
4.6 [2-4] Week Table
4.8 [2-5] Holiday Table
4.9 [2-6-1] Numbering Plan—Main—Features—
4.12 [2-7-1] Class of Service—COS Settings—Manager—
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Time Service)
→ Parameter Selection (for Time Service - Automatic/Manual)
→ Optional Parameter (Ringing Tone Type Number) (for Time Service)
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Time Service)
→ Parameter Selection (for Time Service - Automatic/Manual)
→ Optional Parameter (or Ringing Tone Type Number) (for Time Service)
6.18 [4-3] DSS Console
→ Type
→ Parameter Selection (for Time Service)
→ Parameter Selection (for Time Service - Automatic/Manual)
→ Optional Parameter (Ringing Tone Type Number) (for Time Service)
PT Programming Manual References
[101] Time Service Switching Mode
[102] Time Service Starting Time
[514] Time Service Manual Switching
Document Version 2013-05
Time Service (Day / Lunch / Break / Night) Switch
Time Service Switch
17.1.5 Time Service
Feature Manual 345