Panasonic KX-NCP500 Feature Manual page 183

Interface Type
Primary Rate Interface
(PRI)
*1
3.33 [1-1] Slot—Port Property - PRI Port—Main—
2.
ISDN Supplementary Services for Public Network
Service
Direct Inward Dialing
(DID)
Calling Line
Identification
Presentation (CLIP)
Connected Line
Identification
Presentation (COLP)
Calling Line
Identification
Restriction (CLIR)
Connected Line
Identification
Restriction (COLR)
Caller ID
3.
Private Networking Connection (QSIG)
Private networking with QSIG is possible using an ISDN line. Each ISDN port must be programmed so that
each ISDN line has a "master" connection and a "slave" connection.
Conditions
•
En bloc
The PBX sends all of dialed digits at once after the extension user completes dialing. The PBX recognizes
the end of dialing as follows:
–
the # key is pressed (programmable).
4.18 [2-9] System Options—Option 2—
–
the dialed number is a preprogrammed telephone number.
5.4 [3-1-4] Dialing Plan
–
the inter-digit timer expires.
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
•
Extension Number
An extension number can be assigned to each ISDN port.
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
Document Version 2013-05
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Description
Provides twenty-three 64 kbps B channels for
communication and one 64 kbps D channel for
signaling (23B + D).
Port Type
Description
Directs a call with a DID number to the
preprogrammed destination.
Sends the caller's telephone number to the
network when making a call. The called party can
see the number on his or her telephone display
before answering the call.
Sends the telephone number of the answered
party to the network when answering a call. The
caller can see the number on his telephone
display when the line is connected.
Prevents the caller's CLI from being presented to
the called party.
Prevents COLP from being sent by the answered
party.
The PBX receives Caller ID information, such as
the caller's name and telephone number, when a
call is sent from the network. A display proprietary
telephone (PT) user can see this information
before answering the call.
End of Dial Plan—[#] as End of Dial for en Bloc mode
CO Line,
QSIG—Master,
QSIG—Slave
® 4.1.6 DID (Direct
Inward Dialing)
® 3.1.16 CLIP
(Calling Line
Identification
Presentation)
® 3.1.3 Caller ID
Dial—Extension Inter-digit
Extension Number
Feature Manual
Port Mode
*1
Details in
183