Multiple Vpss - Panasonic KX-NCP500 Feature Manual

13.1.16 Private Network Features—Centralized Voice Mail
PBX Code Method
Mailbox 101
Mailbox 201
Extn.
Mailbox 730101
101
Mailbox 730102
VPS
[Explanation]
Extension 102 does not answer the CO line call, so the call is forwarded to the VPS, using a VPS mailbox
number containing the TIE line access number, the PBX code of the PBX that received the call, and the
extension number that received the call.
This mailbox number is the same as if an extension connected to PBX-1 called extension 102 of PBX-2. This
mailbox number should be programmed as the mailbox number and owner extension number on the VPS.

Multiple VPSs

More than one PBX in the network can have a VPS connected, and each VPS can provide voice mail services
for extensions connected to other PBXs in the network.
Conditions
[General]
•
The KX-NCS3910, KX-NCS4910 or KX-NCS4950 (Activation Key for Software Upgrade to Enhanced
Version) is required for the KX-NCP series/KX-TDE series PBX connected to the VPS, and for all
KX-NCP series/KX-TDE series PBXs that will use this feature.
•
All PBXs in the network must be KX-NCP series, KX-TDE series, or KX-TDA series PBXs. For information
on the hardware requirements for KX-TDA series PBXs that share the same VPS, refer to the
corresponding Feature Manual.
•
Only KX-TVA series VPSs connected using DPT integration support this feature.
•
An extension can receive Message Waiting notifications from multiple VPSs connected to PBXs in the
network. When multiple notifications of the number of unheard messages in an extension user's message
box are sent from different VPSs, the most recent notification will be displayed.
262 Feature Manual
Telephone Company
PBX-1 (PBX
Code: 20)
Private network
Mailbox 730102:
"Hello. I am not at
my desk right now."
"7-30-102"
[PBX
code]
[Extn. no.]
[TIE line
access no.]
TIE Line Network
PBX-2 (PBX
Code: 30)
Extn.
Extn. 102
101
Fwd to VPS
Outside Caller
PBX-3
PBX-4
PBX-5
PBX-6
PBX-7
PBX-8
Document Version 2013-05