Music On Hold - Panasonic KX-NCP500 Feature Manual

Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.43 Message Waiting

11.1.4 Music on Hold

Description
Music or other audio can be played to a party that has been put on hold. The following audio sources are
available:
a.
Internal music source
b.
External music source
c.
Outgoing Message (OGM)
d.
Tone
Audio sources are assigned to specific BGM numbers according to the table below. One of these BGM
numbers, or the tone, can be selected for Music on Hold.
[BGM Number and the Music Source]
BGM No.
External music port 1, internal music
1
source 1, or internal music source 2
OGM
2
3 OGM
4 OGM
5 OGM
6 OGM
7 OGM
8 (Not available)
For tenant users, each tenant can select one of the BGMs or the tone to use for Music on Hold.
Conditions
[General]
•
Hardware Requirement: User-supplied music source (when an external music source is assigned)
•
Volume Control
It is possible to change the volume of an internal and/or external music source.
•
For tenants, the type of call determines which tenant's music source is used, as follows:
Document Version 2013-05
KX-NCP Series PBX
Music Source
KX-TDE Series PBX
External music port 1
External music port 2, internal music
source 1, or internal music source 2
OGM
OGM
OGM
OGM
OGM
OGM
11.1.4 Music on Hold
Feature Manual 201