Cli (Calling Line Identification) Distribution - Panasonic KX-NCP500 Feature Manual

3.1.15 CLI (Calling Line Identification) Distribution

Conditions
•
The KX-NCS3910 (Activation Key for Software Upgrade to Enhanced Version) for the KX-NCP500/
KX-NCP1000, the KX-NCS4910 (Activation Key for Software Upgrade to Enhanced Version) for the
KX-TDE100/KX-TDE200, or the KX-NCS4950 (Activation Key for Software Upgrade to Enhanced Version)
for the KX-TDE600 is required to use this feature.
•
Call disconnection detection
When LCOT is used for CO line, the system cannot detect the call disconnection. So the system
disconnects CO line side after transfer of the call (unscreened transfer).
Feature Manual References
19.1.2 Virtual PS
3.1.15 CLI (Calling Line Identification) Distribution
Description
Directs an incoming CO line call to a specific destination when the caller's telephone number matches a number
in the System Speed Dialing Table. Each telephone number in this table can be assigned its own Calling Line
Identification (CLI) destination.
CLI distribution allows you to direct calls from specific people to specific destinations, and has many
applications. For example, you can program the PBX to automatically connect calls from priority clients to their
sales representatives, or automatically connect mobile phone calls from an executive to his or her assistant.
In order for CLI distribution to function, the PBX must receive Caller ID information from the telephone company.
CLI distribution works in conjunction with both Direct In Line (DIL) and Direct Inward Dialing (DID) distribution;
it can be enabled or disabled for each CO line (for DIL) and for each DID number, for each time mode.
When a call has Caller ID information and CLI distribution is enabled for the current time mode, CLI distribution
will direct the call to its destination, ignoring preprogrammed DIL or DID destinations.
[Programming Example: System Speed Dialing Table]
Location
(System Speed
Dialing No.)
000
001
® 8.1 [6-1] System Speed Dial—
*1
® [001] System Speed Dialing Number
® 8.1 [6-1] System Speed Dial—
*2
® [002] System Speed Dialing Name
® 8.1 [6-1] System Speed Dial—
*3
In this example:
If the caller's telephone number is "1-212-555-1234":
1.
The PBX looks for the number in the System Speed Dialing Table. (The CO Line Access number, "9", is
disregarded.) The number is found in location 000.
2.
If CLI distribution is enabled in the current time mode for the DID number or for the CO line carrying the
call (for DIL distribution), the call is routed to its CLI destination, extension 200.
58 Feature Manual
System Speed
Telephone No.
Dialing Name
*1
ABC Company 912125551234
XYZ Company 913135551234
Name
CO Line Access Number + Telephone Number
CLI Destination
CLI Destination
*2 *3
200
300
Document Version 2013-05