Call Transfer (Ct)-By Qsig - Panasonic KX-TDE100 Features Manual

1.30 Networking Features
1.30.4.4 Call Transfer (CT)—by QSIG
Description
The PBX transfers the call to a destination extension in another PBX in QSIG network.
If the same trunk group is used for the incoming call and the transferred call, the following situation will be
possible.
[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
• This feature complies with European Telecommunication Standard (ETS) specification ETS 300 261,
Call transfer supplementary service.
• This feature can be enabled or disabled on an ISDN (QSIG) port basis.
• Call Transfer with Announcement and Call Transfer without Announcement is possible
(→ 1.12.1 Call Transfer).
370 Feature Guide
QSIG
PBX-2
1 Call to 2000
2 Transferred
to 1001
Extn. 2000
QSIG
Extn. 2000
Extension 1000 of PBX-1 dials extension
1
number "2000", and the call is sent to
extension "2000" of PBX-2 through QSIG
network.
The call is transferred from extension
2
2000 to extension "1001" of PBX-1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the transfer destination of
extension 2000.
PBX-2