Canon CP660 Service Manual page 89

:
Caution
When removing the pre-exposure
LED assembly, take care not to apply
excess force to the pre-exposure
LEDs.
5) Remove the two screws, and detach
the heat discharge fan 3 together with
the fan duct.
q Screws
Figure 3-522
6) Remove the seven screws, and
detach the right cover.
q
w
q Screws
Figure 3-523
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
q
w Fan duct
q
w Right cover
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 LASER EXPOSURE SYSTEM
9. Multifeeder Tray
1) Open the multifeeder tray.
2) Slide the sub tray of the multifeeder
tray, and disengage the two claws
used to secure the tray in place.
q
q Claws
Figure 3-524
3) Disconnect the
remove the multifeeder tray.
w
q Connector
w Multifeeder tray
Figure 3-525
connector, and
q
3-19