Selecting The Type Of Message For The Printer Unit - Canon CP660 Service Manual

CHAPTER 8 INSTALLATION
D.

Selecting the Type of Message for the Printer Unit

If you have installed the PS/PCL Board to the printer unit, you must select the type of
message appearing on its control panel.
• EUROPE
• JAPAN
• UNITED STATES
• UNKNOWN
• EUROPE2
• JAPAN2
• UNITED STATES2
The default setting is UNITED STATES (i.e., for user maintenance).
To change the type of message, perform the following:
No.
1 Turn off the printer unit.
2 Check to make sure that the jumper head is
fitted to J27 of the PS/PCL Board.
3 Install the PS/PCL Board to the printer unit.
4 While holding down the Menu and
the control panel of the printer unit, turn on
the printer unit.
At this time, be sure to hold down the two
keys until the message 'START SELF-TEST'
appears.
5 Wait until the printer unit has run self diagno-
sis, and indicates the message 'VERSION
INFO'
6 Press the Menu key several times so that the
message 'CHANGE DEFAULT LOCALE:'
appears.
7 Press the Enter key.
8 When 'DEFAULT LOCALE:' has appeared,
select the item that indicates the site of instal-
lation using the
(The currently selected item is indicated by
the asterisk * on the last digit.)
8-14
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
for service maintenance
not used
for user maintenance
not used
not used
not used
for service maintenance
Work
key on
or key.
If the printer unit has started without
displaying the message, turn it off, and
start with step 4.
• EUROPE
for service maintenance
• JAPAN
not used
• UNITED STATES
for user maintenance
• UNKNOWN
not used
• EUROPE2
not used
• JAPAN2
not used
• UNITED STATES2
for service maintenance
The default setting is UNITED STATES
(i.e., for user maintenance).
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks