Canon CP660 Service Manual page 203

4) While opening the registration roller
guide and the jam guide, remove the
four screws and disconnect the con-
nector; then, detach the registration
roller assembly.
e
t
q Registration roller guide
w Jam guide
e Screws
r Connector
t Registration roller assembly
Figure 5-615
:
Caution
When replacing each part of the regis-
tration roller assembly, take extra care
not to touch the sensor window.
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w r
q
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
2. Removing the Registration Clutch
1) Remove the E-shaped stop ring, and
detach the registration clutch.
w
q E-shaped stop ring
w Registration clutch
Figure 5-616
3. Registration Lower Roller
1) Remove the spring, E-shaped stop
ring, and bushing.
q Spring
w E-shaped stop ring
e Bushing
Figure 5-617
q
q
w
e
5-41