Canon CP660 Service Manual page 139

4. Removing the
Assembly
1) Perform steps 1) through 7) on p. 4-43
to remove the upper cover, heat dis-
charge fan 1, shielding box, and rear
cover stay.
2) Perform step 2 of removing the devel-
oping rotary motor PCB to remove the
PCB.
3) Remove the two screws, and detach
the duct cover.
q
q Screws
Figure 4-805
4) Remove the screw, and detach the
gear cover.
q Screw
Figure 4-806
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Delivery Drive
w
w Duct cover
w
q
w Gear cover
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
5) Remove the seven screws, and
detach the delivery drive assembly.
q Screws
w Delivery drive assembly
Figure 4-807
5. Removing the Main Drive Assembly
1) Perform the steps on p. 5-35 to
remove the pick-up assembly.
2) Remove the steps on p. 3-21 to
remove the inside covers 1, 3, and 4.
3) Perform the steps on p. 4-43 to
remove the main motor.
5) Disengage the two claws, and detach
the gear cover.
q
q Claws
Figure 4-808
q
w
w
w Gear cover
4-41