Canon CP660 Service Manual page 369

3. TEST
Test mode is for checking while operating the printer unit.
Sub Menu
DEV-DRV IUse it to rotate the developing rotary cartridge
and the cylinder for a specific period of time.
MAIN-DRV Use it to rotate the intermediate transfer drum
and the photosensitive drum for a specific peri-
od of time.
:
Caution
1. If you want to execute test mode while keeping the door covers open, use the door
switch actuators to keep the door switches on.
2. Do not put your hand or face inside when checking the operation of the engine
while the door cover is open.
3. Do not execute operation/inspection mode until the engine stops operation.
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Description
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
Remarks
1. Select 'DEV-DRV'.
2. Using the
key, select 'YES'.
3. Press the ENTER
key to execute.
1. Select 'MAIN-DRV'.
2. Using the
key, select 'YES'.
3. Press the ENTER
key to execute.
or
or
10-87