Canon CP660 Service Manual page 263

No.
5
While pushing down on the right side of the
paper, check to make sure that the stack has
not exceeded the limit marking.
6 Attach the label to the paper size card to
indicate the size of the paper placed in the
cassette; then, fit the paper size card in the
slot found at the front left of the cassette.
7 Push the cassette fully inside. Perform the
same for the cassette 2.
Check to make sure that the Add Paper indi-
cator on the control panel turns off.
If the user desires face-up delivery, select
8
side tray delivery in user mode, and mount
the face-up tray. (At time of shipment, the
center tray (face-down) is selected.)
Check the external covers for damage and
9
deformation.
10
Clean up the area around the printer unit.
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Work
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
Remarks
Stack limit
marking
1
2
8-13