Unpacking And Installation; Unpacking The Printer Unit - Canon CP660 Service Manual

II. UNPACKING AND INSTALLATION
Bringing in a piece of metal from a cold to warm place can cause droplets of water to
form on its surface. Such a phenomenon is known as condensation , and a printer unit
suffering condensation can generate blank prints.
If the printer unit has just been brought in from a cold place, leave it alone for at least
one hour before unpacking and installing it.
A.

Unpacking the Printer Unit

No.
1
Unpack the printer unit.
:
Caution
2 The printer unit weighs about 83 kg.
Be sure to work in a group of four.
Further, keep in mind that the printer
unit is heavier at the rear, requiring
care to maintain balance.
Work in a group of four as shown, lift the
printer unit by placing hands under its bot-
tom, and place it at the site of installation.
3 Remove all tape from the external covers of
the printer unit.
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Work
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
Remarks
8-3