Canon CP660 Service Manual page 155

7. Removing the Separation Static
Eliminating Bias PCB
1) Perform steps 2) through 5) on p. 4-43
to remove the rear cover and the
shielding box.
2) Remove the two screws, and discon-
nect the three connectors; detach the
separation static cleaning bias PCB.
q Screw
e Separation static eliminating bias
PCB
Figure 4-851
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
q
w
e
q
w Connectors
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
8. Removing the Developing Rotary
Motor PCB
1) Perform the steps on p. 3-16 to
remove the rear cover.
2) Remove the screw, remove the three
claws, and disconnect the six connec-
tors; then, detach the developing
rotary motor PCB.
r
w
q Screw
e Connectors
r Developing rotary motor PCB
Figure 4-852
w
e
q
w Claws
4-57