Canon CP660 Service Manual page 200

CHAPTER 5 PICK-UP/FEEDING SYSTEM
2. Removing the Pick-Up Motor
1) Disconnect the connector.
2) Remove the two screws, and slide the
pick-up motor in the direction of the
arrow to detach.
e
q
q Connector w Screws
e Pick-up motor
Figure 5-606
3. Removing the Feeding Clutch
1) Disconnect the connector.
2) Remove the screw, and disengage the
two claws; then, detach the pick-up
PCB.
w
r
q Connector w Screw
e Claws r Pick-up PCB
Figure 5-607
3) Disengage the claw, and detach the
clutch fixing plate.
5-38
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
4) Remove the E-shaped stop ring, and
detach the feeding clutch.
q
w
w
q Claw
e E-shaped stop ring
r Feeding clutch
4. Removing the Cassette Pick-Up
Solenoid
1) Disconnect the connector.
2) Remove the screw, and detach the
cassette pick-up solenoid.
q
e
q
q Connector
e Cassette pick-up solenoid
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
e
r
w Clutch fixing plate
Figure 5-608
e
w Screw
Figure 5-609
w