Canon CP660 Service Manual page 229

4) Remove the two screws, and pull out
the connector; then, pull out the lead
wire.
q
q Screw w Connector
e Lead wire
Figure 6-326
5) Remove the screw, and remove the
heater metal fixing; then, pull out the
lower heater slowly.
e
q Screw w Heater metal fixing
e Lower heater
Figure 6-327
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
e
w
q
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
Points to Note When Mounting
When securing the lead wire terminal
of the fixing heater or the like with a
screw, take care not to subject the lead
wire to excess force.
10. Removing the Upper Fixing Roller
1) Perform the steps on p. 6-1 to remove
the upper fixing heater.
2) Perform steps 2) through 5) on p. 6-12
to remove the upper thermistor.
3) Perform steps 2) through 5) on p. 6-16
to remove the lower fixing heater.
4) Pull up the releasing lever to remove;
then, slide the releasing lever in the
direction of the arrow to detach.
q Screw w Releasing lever
Figure 6-328
q
w
6-17