Creating Midi Tracks - PRESONUS StudioLive 16.0.2 Owner's Manual

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.5 Studio One Artist Quick Start
7.5.6

Creating MIDI Tracks

122 122
3. Once you have added your tracks, you can assign the
input by simply clicking on the input to which a track is
currently assigned. This will bring up the inputs list. You
can also access the audio I/O setup from here.
4. If you would like to add a track for each of the available
inputs and have the routing automatically assigned,
simply go to Track | Add Tracks for All Inputs.
5. To begin recording, create an audio track, assign it
to input 1, and connect a microphone to the first
channel on the StudioLive. Select Record Enable on
your track in Studio One Artist. Turn up the Channel
1 fader while speaking/singing into the microphone.
You should see the input meter in Studio One Artist
react to the input. Adjust the gain so the input level
is near its maximum without clipping (distorting).
6. Connect a set of headphones to the StudioLive
headphone output and select the Main button in
the Monitor section on your StudioLive. You may
also wish to connect monitors to the StudioLive's
control-room outputs. You are now ready to record.
For complete instructions, please consult the
Studio One Reference Manual, which is located
on your Studio One Artist installation DVD.
7. Click on the Add Tracks button. When the Add Tracks window launches,
select Instrument as the track format and click the OK button.
8. To assign your MIDI input, click on the MIDI Inputs list and select your
external sound module.
If you have added virtual inputs to your session,
you will also see them as available inputs.
If you selected your MIDI keyboard controller as the default keyboard,
it will already be selected. If not, choose your MIDI controller from the
Output menu directly below.
PreSonus StudioLive 16.0.2
™