Vsl: Overview Tab - PRESONUS StudioLive 16.0.2 Owner's Manual

Owner's Manual

VSL: Overview Tab

7.2.2
Aux Sends
Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
At the top of the VSL window, you will see four tabs: Overview,
Channel, GEQ, and Setup. The Overview tab provides you with a
complete graphical representation of your StudioLive. As you adjust
parameters on the StudioLive, you will notice that the VSL overview
is also updated. If you use your mouse to adjust a parameter in VSL,
the StudioLive will be updated remotely. It is important to remember
that every button, knob, slider, and fader on the VSL corresponds
directly to a button, knob, slider, or fader on your StudioLive.
The graphic above identifies each controller, labeled with its
corresponding control on the StudioLive, and can be used as
a map to quickly learn how to navigate the Overview tab.
The Overview Tab also provides you with a look at the send levels of every
channel on your StudioLive to every Aux output and FX bus.
To quickly set up an Aux mix, use your mouse to set the send level
for Channel 1. Right-click on the Channel 1 send level and sweep
your mouse across the other channel sends for that Aux. The
send level will be copied to every other channel for that Aux.
VSL: Virtual StudioLive 7.2
73 73