Creating Midi Tracks - PRESONUS StudioLive 24.4.2 Owner's Manual

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.5 Studio One Artist Quick Start

Creating MIDI Tracks

7.5.6
136 136
1. Click on the Add Tracks button. When the Add Tracks window launches,
select Instrument as the track format and click the OK button.
2. To assign your MIDI input, click on the MIDI Inputs list and select your
external sound module.
3. If you have added virtual inputs to your session,
you will also see them as available inputs.
4. If you selected your MIDI keyboard controller as the default keyboard,
it will already be selected. If not, choose your MIDI controller from the
Output menu directly below.
5. To the left of the Add Track button, you will find the Inspector button.
Click it to display more parameters for the selected track.
6. At the bottom of the Inspector menu, you will see your Bank and
Program selections. From here, you can remotely change the patch on
your sound module.
MIDI data does not contain audio signals. To hear your sound module,
you must connect the audio output of the sound module to a StudioLive
input, then connect the StudioLive's audio outputs to a sound system.
(You also can listen on headphones, using the headphone output.)
When you are ready to mix your Song, you must convert the recorded
MIDI data to an audio waveform by recording a new audio track.
PreSonus StudioLive 24.4.2
™