Input Channel Strip; Input Channel Controls - PRESONUS StudioLive 16.0.2 Owner's Manual

4 Controls
4.3

Input Channel Strip

Output Metering
Button
Gain Reduction
Metering Button
Fader Locate Button
Power User Tip: Fader Locate mode can be enabled at any time to recall the
stored fader position. If you've made multiple changes after a Scene recall, you can
always recall your stored fader position by simply engaging Fader Locate.
Input Channel Strip
4.3

Input Channel Controls

4.3.1
Trim Control
It is very important to properly adjust this control in order to minimize noise and avoid overload
distortion. Follow the Quick Start level-setting instructions on page 5 before operating a channel.
24 24 24
Turns PFL Output Metering On and Off.
Switches the meters to display the post-dynamics, post-fader level of the Aux and
Main buses. Only the last six meters are used. Meter 7 displays Aux 1 output, Meter 8
displays Aux 2 output, Meter 9/10 displays Aux 3 output, Meter 11/12 displays Aux 4
output, and Meters 13/14 and 15/16 display the left and right side, respectively, of
the Main bus.
Turns Gain Reduction Metering On and Off.
Displays the gain reduction of the input bus. Meters have a one-to-one relationship
with channels (that is, Meter 1 shows the gain reduction of Channel 1 and so on).
Turns Fader-Recall Metering On and Off.
Displays the fader position of the stored Scene. When recalling a fader position,
adjust the fader until only the center LED is visible in its meter. To recall the stored
position of an Aux or Main fader, simply move the fader. The meters will instantly flip
to display the stored position of each of the output faders. The same meters that
display the outputs are used for locate.
The StudioLive is equipped with all of the standard input controls of an analog mixer.
In addition, the StudioLive provides the added flexibility of routing a playback stream
from your audio-recording software to the mixer via the FireWire bus, just as if it were
an analog input. This lets you incorporate digital audio tracks into the main mix as
well as inserting plug-in effects and software instruments from your audio program.
Adjusts the Input Gain Level
The Trim control adjusts the gain of the channel's analog input.
PreSonus StudioLive 16.0.2
™