PRESONUS StudioLive 16.0.2 Owner's Manual page 156

8 Tutorials
8.4 Aux Bus Mixing
150 150 150
reverb to liven up a relatively dead room. You might send a little bit of each input
to the reverb, but you probably will not want much of the drums and bass to be
processed, as too much reverb could reduce their impact and leave your mix without
a sturdy foundation. So rather than turning the aux-send level for the kick drum
channel all the way up, turn it so that the meter reads between 20-30% saturation.
This way only a small portion of the kick drum input will be affected by the reverb.
Once you have determined your effects mix, you can press the Select button
for the effect bus (FXA or FXB) to add Fat Channel dynamics processing
and EQ to the reverb-enhanced signal. The knobs for FXA and FXB controls
the level of the aux mix relative to the level of your main mix.
PreSonus StudioLive 16.0.2
™