Creating Aux And Fx Mixes - PRESONUS StudioLive 16.0.2 Owner's Manual

4 Controls
4.4 Aux Sends

Creating Aux and FX Mixes

4.4.3
FXA Encoder
Mode Button
FXB Encoder
Mode Button
Aux 1 Encoder
Mode Button
Aux 2 Encoder
Mode Button
28 28 28
In addition to setting the dynamics for each channel and bus and
metering each channel and output, the Fat Channel also allows you to
create Aux mixes and quickly view the send level for each channel.
The Encoder Mode buttons to the left of the Fat Channel are used
for just this purpose. Each one of these buttons allow you to view
and set the send level for each channel to that Aux or FX mix.
Enables FXA Mixing and Metering in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become the FX-send
level controls for each of their respective input channels to FXA. The meters will
display the send level of each of the input channels. The encoders for the stereo
channels set the send level for both the Left and Right input provided that stereo
linking is enabled. See 4.1.4 for details.
Enables FXB Mixing and Metering in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become the
effects-send level controls for each of their respective input channels to FXB. The
meters will display the send level of each of the input channels. The encoders for the
stereo channels set the send level for both the Left and Right input provided that
stereo linking is enabled. See 4.1.4 for details.
Enables Aux Mixing and Metering in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become the
aux-send level controls for each of their respective input channels to Aux 1. The
meters will display the send level of each of the input channels. The encoders for the
stereo channels set the send level for both the Left and Right input provided that
stereo linking is enabled. See 4.1.4 for details.
Enables Aux Mixing or Pan Control (Stereo Send Mode Only) and Metering in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become the
aux-send level controls for each of their respective input channels to Aux 2. The
meters will display the send level of each of the input channels. The encoders for the
stereo channels set the send level for both the Left and Right input provided that
stereo linking is enabled.
When Aux 1 and Aux 2 are linked, this button enabled pan control for each
channel in the Aux pair. When this button is enabled, the 12 encoders in the Fat
Channel become the pan controls for each of their respective input channels.
The meters will display the pan setting of each of the input channels. Use Aux
1 Encoder mode to set the send level of each channel to the Aux pair.
For more information of stereo linking, please review Section 4.1.4.
PreSonus StudioLive 16.0.2
™