PRESONUS StudioLive 16.0.2 Owner's Manual page 134

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.5 Studio One Artist Quick Start
Assigning/Unassigning FXA and FXB to the Main Bus
128 128
You can use the same steps to create volume-curve automation for
FXA and FXB output levels on your StudioLive mixer. Just be sure
to select the right Control Change number from the parameter
pull-down menu on the automation track in Studio One!
Follow Steps 1-7 to control FXA, FXB, and Main Output levels.
1. Scroll through the MIDI Control Change list until you find Sustain
Pedal On/Off (CC 64) and Sustenuto Pedal On/Off (CC 66). Unlike
volume control, the mute controls require On/Off messages;
therefore, we recommend using these two Control Change numbers
when controlling the StudioLive 16.0.2 with Studio One Artist.
2. Select each control and click Add.
3. Click Close.
4. Select Sustain Pedal On/Off from the Parameter pull-
down menu on the automation track.
5. Using your Pencil tool, draw an "ON" message that lasts for several bars.
6. Note that the FXA/FXB assignment to the main bus is a simple toggle, so
when it receives its CC message, the button will be put into the opposite of
its current state. If you want the "On" state in Studio One to turn the button
on, the button will need to be in the "Off" state when it receives the message.
7. Press Play to watch and hear Studio One assign
and unassign FXA to the Main bus.
These same steps can be used to control FXB assign/unassign to
the Main bus. Just be sure to select the correct Control Change
message from the Automation track's parameter menu.
PreSonus StudioLive 16.0.2
™