PRESONUS StudioLive 16.0.2 Owner's Manual page 86

7 Software: Universal Control, SL Remote, Capture, and Studio One Artist
7.3 Using StudioLive Remote for iPad
80 80
Windows Vista
1. Open Start>Connect to.
2. Click "Set up a connection or network. "
3. Select "Set up a wireless ad hoc network" and click Next.
4. Enter the new network name such as "StudioLive. "
5. Enter a Security key or password. For the best security,
include letters, numbers, and punctuation.
6. Check "Save this Network. "
Windows 7
1. Open Start>Control Panel.
2. Click "Network and Internet. "
3. Click "Network and Sharing Center. "
4. Under "Change your networking settings, " click
"Set up a new connection or network. "
5. Select "Set up a wireless ad hoc (computer-to-computer) network. "
6. Click on "Next" twice.
7. Enter the network name such as "StudioLive. "
8. Select the Security WAP (or WEP).
9. Enter the Security key or password. For the best security,
include letters, numbers, and punctuation. Then click OK.
10. Check "Save this network. "
11. Click "Turn on Internet connection sharing. "
Mac OS X 10.5/10.6
1. On the Menu bar click on the Wireless Status Icon.
2. From the pull-down menu select "Create Network.... "
3. Give your Network a name, such as "StudioLive. "
4. If you would like set up a password (recommended),
check "Require Password. "
5. Create your password within the guidelines and click "OK. "
6. Once your network has been successfully created,
you will see it in your list of available networks.
PreSonus StudioLive 16.0.2
™