Quick Start - PRESONUS StudioLive 16.0.2 Owner's Manual

Owner's Manual

Quick Start

1.0
E
Graphic EQ:
N
C
*Section 5.3
O
Creating FX Mixes:
D
E *Sections 4.4.3
R
& 8.4.2
M
O
Creating Monitor
D
Mixes:
E
*Sections 4.4.1,
S
4.4.3 & 8.4.1
M
C
FireWire Returns:
U
O
L
*Sections 4.5.1 & 6.4.2
N
T
T
I Solo:
R
M
O *Sections 4.5.1 & 4.7.2
O
L
D
Mute:
S
E
*Section 4.5.1
Stereo Link:
*Section 4.1.4
METERING CONTROLS:
Section 4.2.1
Input Metering:
Output Metering:
Gain Reduction Metering:
Fader Locate:
Section 5.1
Getting Started: IMPORTANT LEVEL SETTING
1.1
• Always turn the Main fader and both the Monitor and Phones knobs
• Your faders should be set on or near the "U" mark whenever possible. The "U"
This is a map of the StudioLive 16.0.2. You'll notice that each major section is
marked with a manual-section number where you can find more information.
Trims - For Level Setting see Sections 1.0 and 8.6
Fat Channel: Section 4.1
* Dynamics - Section 4.3.1
* Metering - Section 4.2
* Stereo Linking - Section 4.1.4
* Copying/Saving - Section 5.2
* Dynamics Processing Tutorial - Section 8.2
* EQ Tutorial - Section 8.3
Multimodes and Multimode Buttons - Section 4.5
Select Buttons - Section 4.1.1
Channel Faders - Section 4.3
Before you begin, there are a few general rules of
thumb that we recommend you follow:
in the Monitor section down before making connections. Before
plugging or unplugging a microphone while other channels are
active, mute the channel to which you are connecting.
indicates unity gain, meaning the signal is neither boosted nor attenuated. If the
main output of your StudioLive is too high or too low when your faders are at or
near unity, you can use the output-level knob on the rear panel of the StudioLive
to adjust the level up or down until you have achieved the optimal volume.
Quick Start: Level Setting
Quick Start
Menu Display:
* FX Menu: Section 4.8
* Scene Menu: Section 5.1
* System Menu: Section 5.4
Internal FX
Monitor
Solo
Level &
Bus
Bus
Talkback
Assignment
Section
Sections
4.7.3
4.7.2 &
Section 4.4.2 Section
8.7
4.7.1
Aux Faders -
Section 4.4
Main Output:
Section 4.6
1
1.0
1 1