PRESONUS StudioLive 16.0.2 Owner's Manual page 31

Owner's Manual
Phantom Power
Button
Input Channel Select
Button
Input Channel
MultiMode Button
Channel Fader
Turns Phantom Power On/Off.
The StudioLive is equipped with individual phantom power for every microphone
input. As previously described in Section 4.1.3, the 48V button is accessible via the Fat
Channel when an input channel is selected. It will illuminate when phantom power is
activated. For more information on phantom power and the microphones that
require it, please review Section 8.1.
Enables Fat Channel Processing and Routing.
As previously described in Section 4.1.1, the Select button routes its channel
through the Fat Channel, allowing you to add dynamics processing, EQ, and panning
and more.
Engages FireWire Return, Solo, and Mute .
This button's function is determined by the MultiMode Control Switches. Depending
on which mode is engaged, this button will function as the FireWire Return, Solo, or
Mute button for its input channel. For more information on the MultiMode Buttons
and their functions, please refer to Section 4.5.
Controls the Overall Level of the Channel.
Each input channel features a 60 mm fader for level adjustment. Unity gain (0 dB) is
denoted by a "U. "
The white area above the fader can be used as a scribble strip. Use only
oil pencils; other types of pens or pencils cannot be wiped off.
To clean the scribble strip, use a lightly damp cloth to remove the writing.
Controls 4
Input Channel Strip 4.3
25 25 25