Enabling Lockout Mode - PRESONUS StudioLive 16.0.2 Owner's Manual

Owner's Manual

Enabling Lockout Mode

7.2.6
Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
Your StudioLive features a Lockout mode that allows you to
temporarily disable nearly every feature on the StudioLive,
although analog features (such as input-trim knobs,
faders, cue and monitor levels) can still be adjusted.
Because of this, after unlocking your StudioLive, and before
resuming mixing, you should take a quick glance at your
input trims and output levels. If you have locked your fader
position, you will be able to recall your pre-lockout fader
positions using the Locate button in the meter section.
Until you connect your StudioLive to a computer, the mixer cannot
be locked, so don't worry about accidentally locking yourself out.
1. With your StudioLive connected and synced to your computer, launch
VSL and click on the Setup tab.
2. Click on the Lock Out button.
3. To set your custom password, click on the box next to "Device is
Lockable. " At this point, a cursor will appear in the password box. Enter
a 5-digit code, using any number between 1 and 9, and click the Set
button. Your password will no longer be displayed. Should you need to
change your password, simply click on the box next to "Device is
Lockable. " Your old password will be deleted, and you will be able to
enter a new password. Once you have set your password, the
StudioLive can be locked with or without being synced to a computer.
4. To lock your StudioLive, press the System button in the Digital Effects |
Master Control section and navigate to Page 6: Lockout. Your StudioLive
cannot be locked unless this page is active. If you have two StudioLive
mixers linked, you only need to lock the Master unit to lock both mixers
in the chain.
At its lowest level of security, Lockout mode allows you to freeze the
current Fat Channel and effects settings. Faders, Aux mixing, and
Scene recall can still be enabled. Each of these mix functions can be
added to Lockout mode. To lock your StudioLive, press the Select
buttons that correspond to the 5-digit password you have set. In
this example, the password is 12345, so you would press the Select
buttons for Channels 1, 2, 3, 4, and 5, in that order. The Panel Status
will switch to Locked, indicating that Lockout mode is now active.
To unlock your StudioLive, navigate back to Page 4: Lockout in
the System menu, if this page is not currently active. Press the
same sequence of Select buttons. The Panel Status will change
to Unlocked, and you will be able to resume your mix.
VSL: Virtual StudioLive 7.2
77 77