Owner's Manual
FXA and Main Bus Output Levels
Naming and Saving Your Patch
Recalling StudioLive Scenes
Using MIDI Control Mode to Remote-Control StudioLive
1. Press the right Parameter button until the LCD reads "EXP1: Assign. "
2. Use the right Parameter button to navigate to the CH# Tx field and
press the Value Down button until the MIDI channel value is "04. "
3. Use the right Parameter button to navigate to the CC# field.
4. Use the Value Up and Down buttons to set the Control Change number to 40.
5. Press the right Parameter button until the LCD reads "EXP2: Assign. "
6. Use the right Parameter button to navigate to the CH# Tx field and
press the Value Down button until the MIDI channels value is "04. "
7. Use the right Parameter button to navigate to the CC# field.
8. Use the Value Up and Down buttons to set the Control Change number to 42.
9. Continue to Naming and Saving Your Patch.
1. Press the right Parameter button until the LCD reads "Patch Name. "
2. Use the Value Up and Down buttons and left/right Parameter
buttons to enter a name (such as "My Preset").
3. Press the Exit button. You will now be on the Main screen of the LCD.
4. Press the Write button so that the LCD displays "Write to [WRITE] 01:"
5. In this example, we will save to patch-library position 01
but you can also use the Value buttons to scroll to an empty
patch position. Press the Write button again to store.
6. Press the Write button again to confirm.
Making sure the red LED is illuminated on the first row of pedals,
depress Pedal 1/6. You will see that Scene 2 has been recalled on your
StudioLive. You are now ready to control your StudioLive as follows:
•
CTL1: Recall Preset F10: Concrete Floors on FXA
•
CTL2: Assign/Unassign FXA to Main bus
Expression Pedal 1: FXA Output level
•
Expression Pedal 2: Main Output level
•
Scenes, Presets, System Menu, and MIDI Control
5
5.5
57 57