PRESONUS StudioLive 16.0.2 Owner's Manual page 24

4 Controls
4.1 The Fat Channel
Compressor Sets and Displays the Amount of
Makeup Gain
Makeup Gain for the Compressor on
the Selected Input Channel or
Output Bus.
This encoder sets, and the meter
displays, the makeup-gain setting
of the compressor for the selected
channel or output bus. When
compressing a signal, gain
reduction usually results in an
overall attenuation of level. The
gain control allows you to restore
this loss in level and readjust the
volume to the precompression
level (if desired). You can adjust
Makeup Gain from 0 dB (no gain
adjustment) to +28 dB.
Limiter Turns on the Limiter for the Selected
On/Off
Input Channel or Output Bus.
When the limiter is engaged the
button will illuminate. The
threshold for the limiter is set to 0
dBFS. The Ratio is ∞:1.
The limiter is available for all input and
output buses.
Low EQ On/Off Activates Control for the Low Band EQ
Button
for the Selected Input or Output Bus.
This button actives control of the
equalizer's Low band for the
selected channel or bus. The
button will illuminate to indicate
control is active.
The Low EQ band is available for all input and
output buses.
18 18 18
PreSonus StudioLive
Low EQ
Sets and Displays the Center
Frequency
Frequency of the Low EQ Band.
Control
This encoder sets, and the meter
displays, the center frequency of
the equalizer's Low band. The
center frequency is the middle of
the passband (the mean) between
the lower and upper cutoff
frequencies that define the limits
of the band.
You can adjust the center
frequency from 36 to 465 Hz.
Low EQ Gain
Sets and Displays the Gain Attenuation
Control
or Boost of the Center Frequency.
This encoder sets, and the meter
displays, the gain cut or boost at
the center frequency for the Low
band. The level of the center
frequency can be set between -15
and +15 dB.
16.0.2
™