Monitor Bus - PRESONUS StudioLive 16.0.2 Owner's Manual

4 Controls
4.7 Master Section
AFL Toggle Button
SIP (Stereo In Place)
On/Off Button
When SIP is engaged, channel mutes will only apply to the Main bus.
SIP does not mute input channels in Aux Send mixes.
4.7.3

Monitor Bus

Headphone Output
Level Control
34 34 34
Enables AFL Solo Mode.
The AFL button engages After-Fader Listening in the Solo bus. Pressing Solo on any
channel or bus routes that channel to the Solo bus and has no effect on the main or
aux mixes. The AFL is not available on the Aux buses.
Enables Solo In Place Mode.
SIP (Solo In Place), or "destructive soloing, " mutes every unsoloed channel on the
StudioLive. The muted channels will be muted in the Main outputs. Note that while
you can manually unmute a channel, this mode should be used with extreme
caution during a live performance. Only the input channels can be placed into
destructive soloing. The Aux buses are omitted from SIP mode.
To enable SIP, press and hold the button until it illuminates red. This ensures
that you cannot enter into destructive Solo mode by accident.
The StudioLive features a headphone output and control-room outputs, giving you
the ability to monitor multiple sources on the StudioLive. The Monitor bus on the
StudioLive allows you to monitor the main outputs, Solo bus, and the main FireWire
return from your computer. Because the Monitor bus is a summing amp, you can
even monitor the World Series on your headphones while running sound at a show.
Adjusts the Overall Level of the Headphone Output.
This knob adjusts the overall level for the headphone output.
PreSonus StudioLive 16.0.2
™