Placing The Original On The Original Glass - Konica Minolta bizhub C200 User Manual

Basic copy operations
3
Adjust the lateral guides to the size of the original.
– For details on loading originals of mixed sizes, refer to
"Copying originals of mixed sizes ("Mixed
Original" setting)" on page
– For details on specifying the binding margin position,
refer to
margin (Margin settings)" on page
2.3.2

Placing the original on the original glass

0 For details on the types of originals that can be placed on the original glass, refer to
page 6-18.
0 When placing the original on the original glass, be sure to lift open the ADF or the original cover at least
18°.
If the original is placed on the original glass without the ADF or the original cover being lifted at least
18°, the correct original size may not be detected.
0 Do not place objects weighing more than 2 kg on the original glass. In addition, do not press down
extremely hard on a book spread on the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the ADF or the original cover. When an
original is being scanned with the ADF or the original cover open, do not look directly at the light that
may shine through the original glass. Although the light that shines through the original glass is bright,
it is not a laser beam and, therefore, is not as dangerous.
1
Lift open the ADF or the original cover.
2
Place the original face down on the original glass.
– Load the original pages so that the top of the original is toward the back or the left side of the
machine.
3
Align the original with the
C200
2-12.
"Selecting the position of the binding
When loaded
in the v orientation:
18° or
more
mark in the back-left corner of the original scales.
2-15.
Lateral guides
When loaded
in the w orientation:
18° or more
2
"Originals" on
2-8