Ldap Configuration - Konica Minolta 7235 Network Setup Manual

5-12. LDAP Configuration

This sets the information required for accessing the LDAP server to acquire mail addresses for [Scan to E-
Mail]. Password input is necessary to configure settings.
● If the LDAP configuration is not set up correctly, network problems could occur. This setup process must
be performed only by the server administrator.
In order to alter any of the fields that follow, a password is required. The default password for Web Utilities is "key
operator password".
To access the LDAP Configuration page, follow these steps:
1
Open the Network Setup page.
2
From the top menu, select LDAP Configuration page. The LDAP Configuration page
opens.
II Network Setup - Administrators only
Chapter 5 Web Utility
114