Konica Minolta 7235 Network Setup Manual page 89

4-14. LDAP Setup
Connect Chk
Connects to the LDAP server to check that the settings for LDAP Setup are correct.
1
Touch the [Connect Chk] key.
2
Check the message on the touch panel.
Connect Chk can be executed on all [LDAP Server Setup] screens (1/4~4/4).
If an error message is displayed on the touch panel, refer to [7-2. Network Error List] (
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
80
page 183).