Scan Density - Konica Minolta 7235 Network Setup Manual

Scan Density

This sets the scanning density.
The factory default is [AUTO].
1
Select [Scan Density] in [Initial setting] screen.
When you touch the [
For details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
( Page 190).
2
Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
AUTO → 1 → 2 → 3 → 4 → 5 (NORMAL) → 6 → 7 → 8 → 9
3
Touch the [RETURN] key.
From now on, the copier operates in accordance with this settings.
] or [ ] key, the selection item is switched.
203
8-2. Scanner Initial Settings
IV Scanner Key Operator - Administrators only
Chapter 8 Key Operator Settings