Zone Name - Konica Minolta 7235 Network Setup Manual

Zone Name

This specifies the zone that the print controller is connected to.
1
Touch the [Zone Name] key.
2
Using the data input screen, input the Print Name.
3
Touch [OK] key.
The Zone Name should not exceed 32 characters.
For details on character input, refer to [3-1.Inputting Text] (
If there is no zone (when using a network with no shielded router), leave this column blank.
Page 16).
43
Chapter 4 Setting from the Control Panel
4-5. AppleTalk Setup
II Network Setup - Administrators only