Konica Minolta 7235 Network Setup Manual page 158

Selecting the destination from the destinations already registered
For details on registering destination, refer to [6-2. Registering Destinations] (
1
Touch the [PC(SMB)] key on [Scanner mode basic] screen.
→ The [PC(SMB) select] screen is displayed.
2
Set the file name for scanned data. Touch the [File name] key.
→ The [Data Input] screen is displayed.
3
Input the filename for the scan data.
The default file name is Scan****.
On the actual display, the asterix (****) will be replaced by the total number of scans (0001-9999) performed since the
machine has been turned on.
Up to 26 half-width characters (13 full-width characters) can be input as a file name.
For details on character input, refer to [3-1. Inputting Text] (
The filename extension [.tif] or [.pdf] is added automatically to the filename.
4
Touch the [OK] key.
→ The display returns to the [Scanner mode basic] screen.
6-1. Selecting the Destination
Page 16).
149
Page 151).
III Scanner
Chapter 6 Using the Scanner Functions