Konica Minolta 7235 Network Setup Manual page 200

4
If a password is set, the key operator's password input screen is displayed. Touch the
[Password] key and input the password in the [Data Input] screen. Then, touch the
[OK] key or input the password (up to 8 digits) using the ten-keys.
5
Touch the [OK] key on the [Password Input] screen.
The Key operator password is set by your service representative. If the key operator password has been set, the key
operator should keep the password safe on his/her own responsibility.
For the Key operator password, please ask your service representative.
If the [Enhanced Security] is used, the password should be 8 digits.
191
IV Scanner Key Operator - Administrators only
8-1. Key Operator Mode
Chapter 8 Key Operator Settings