Network Setup List - Konica Minolta 7235 Network Setup Manual

4-1. Network Setup List

This explains the settings required when connecting the copier to the network.
Set each setting item to match the environment of the network to which the copier is connected. When
changing the setting for each item, ask the network administrator.
TCP/IP Setup (
This sets the items required for communicating with TCP/IP.
NetWare Setup (
This sets the items required for communicating with NetWare.
AppleTalk Setup (
This sets the items required for communicating with AppleTalk.
IPP Setup (
This sets the items required for IPP Printing.
FTP Setup (
This sets the items for sending scanned images from the Copier to the FTP server.
E-Mail (SMTP) Setup (
This sets the items required for sending scanned images from the Copier as E-mail attachments.
E-Mail (POP) Setup (
This sets the items required to use the POP server.
E-Mail Extended Config (
This is used to set the Reception/Disposition notifications for E-mail when the Internet fax is used.
Device Setup (
This sets the interface items.
List Print (
This prints out the setup list.
PC(SMB) Setup (
Sets the items required for sending scanned data to a shared folder of PC.
LDAP Setup (
Sets the items required for accessing the LDAP server to acquire a mail address for [Scan to E-Mail].
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
Page 27
Page 33)
Page 41)
Page 44)
Page 54)
Page 57)
Page 63)
Page 69)
Page 72)
Page 75)
Page 76)
Page 77)
22