Setting Up the Printer
Turning On the Printer
Handling and Storing the Paper and Ribbon
1-4
3. Connect the USB cable (not included) to the USB connector
on the back of the printer and to the USB connector on the
computer.
Move the power switch to on ( | ).
On the operator panel, the orange Power light illuminates. If paper
and ribbon are loaded, Ready 8x10 or Ready 8x12 appears,
depending on the size of ribbon that is loaded.
To turn off the printer, move the power switch to off ( ).
For the best quality prints, carefully handle and store the paper
and ribbons.
• To avoid fingerprints, handle the ribbon by the spool ends and
the paper by the edges. Do not touch the ribbon material or
the glossy sides of the paper.
• Store the paper and ribbons away from direct sunlight, at a
temperature of 30° C (86° F) or lower and a relative humidity
of 60% or lower.
April 2014